Load Radar watches this DAT search 24/7 and instantly forwards matching loads to your Telegram or email. Set your filters once, pick where you want the alerts, and let it run while you work other lanes — no refreshing, no watching the board.
Load Radar is a Pro feature and works on DAT only. See the pricing page for what's included.
Set it up in three steps
Open the Load Radar tab in the side panel over your DAT search, then:
- Set your filters.
- Pick a notification channel.
- Tap Start Radar.
Setting Load Radar filters A short screen recording will be added here.
1. Set your filters
Load Radar only forwards loads that match what you tell it to look for. Fill in whichever fields matter for this lane — you don't need all of them:
- Min Rate — lowest total rate you'll take.
- Min RPM — lowest rate per mile (for example,
1.80). - Min Miles / Max Miles — trip length range.
- Max Deadhead — how far you'll drive empty to the pickup.
- Min Weight / Max Weight — the weight range you can haul.
- Max Length — longest load you'll run.
- Broker MC blacklist — MC numbers to skip so those brokers never trigger an alert.
You need at least one filter set for Radar to start.
2. Pick a notification channel
Choose where matches land. You can turn on more than one:
- Telegram — connect your Telegram once, then get instant messages.
- Email — send to one or more addresses.
- Push — mobile push notifications. This one needs the Numeo mobile app installed; a QR code shows up to help you install it.
3. Tap Start Radar
Hit Start Radar and it begins watching this DAT search. The button switches to Stop Radar — tap it any time to turn the watch off.
If the button is greyed out
Radar tells you why it can't start yet. Common reasons:
- No active DAT search — run a search on the board first.
- Fill at least one filter field — add a rate, RPM, or another filter.
- Enable at least one notification channel — pick Telegram, email, or push.
- Connect Telegram first — link your Telegram before choosing it as a channel.
- Install the mobile app first — needed before push alerts will send.
Good to know
- Each Radar is tied to the DAT search you set it up on. Change the search and set up a fresh Radar for the new lane.
- The Radar keeps running in the background — you don't have to keep the side panel open.
- It's DAT-only and hidden on Truckstop.
To search a single load across more boards instead of watching one lane, see Search a load on more boards. To tidy up the board before you set filters, see Clean up your board with smart filters.
Need a hand? Email support@numeo.ai or use the Help button in the side panel.